Advantages:
In pre-concrete applications, it ensures complete and permanent adhesion to the structural concrete poured on top in every area, never allowing possible water migration between the structure and the insulation shell.
The system does not require protective concrete. There is no need for additional excavation to achieve the protective concrete thickness.
It can be washed with water jet.
It is not affected by structural settlements and moves with the structure.
It is quick and easy to apply.
The joints provide excellent adhesion.
It is resistant to salt water.
It offers the opportunity for waterproofing on the negative side.
In applications on floor concrete, it provides full adhesion to the ground and does not allow water migration.
In the insulation of backfilled curtain walls, it minimizes the risk of water leakage by keeping all the negative elements (eyelet holes, cracks, cold joints, segregations, rod or tie rod holes, etc.) behind the insulation.
It increases the speed of application by offering the opportunity of a single coat application on foundation, curtain and floor concrete.
It is a much more cost-effective and secure system than competing systems.
ORVISEAL liquid waterproofing products
These are liquid-applied products developed to protect your building. They can be applied by brush, roller, or machine spray.
ORVISEAL waterproofing products
Orviseal BR 2K
It is a bitumen and rubber based, two-component (24 kg bitumen, 8 kg powder) liquid waterproofing material with crack-bridging properties, which can be applied to damp reinforced concrete surfaces and forms a protective film when dry, for the external waterproofing of load-bearing reinforced concrete foundation walls.
Orviseal BR 2K
It is a bitumen and rubber based, two-component (24 kg bitumen, 8 kg powder) liquid waterproofing material with crack-bridging properties, which can be applied to damp reinforced concrete surfaces and forms a protective film when dry, for the external waterproofing of load-bearing reinforced concrete foundation walls.
Orviseal 150
It is a pure polyurethane-based, single-component, 500% elastic liquid waterproofing material that can be applied by roll or spray, forms a solid and flexible waterproofing layer when dry, and is resistant to UV rays.
Orviseal 150
It is a pure polyurethane-based, single-component, 500% elastic liquid waterproofing material that can be applied by roll or spray, forms a solid and flexible waterproofing layer when dry, and is resistant to UV rays.
Orviseal MS
It is a single-component liquid waterproofing material based on MS hybrid polymer, which can provide permanent and strong adhesion to reinforced concrete, ceramic, wood, metal and many other surfaces without a primer after the surface is cleaned, dries very quickly and can be painted after drying, and is resistant to UV rays. It has a high level of elastic performance after drying.
Orviseal FLM
It is a single component, bitumen and polyurethane based liquid waterproofing material that can be applied with a brush or roller and is produced for use in detail waterproofing such as pile heads, pipe penetrations, membrane locking, around filters and drains. It forms a flexible and durable bond when dry.
Orviseal Premium 1K
It is a polyurethane-based, single component waterproof primer used for surface preparation and adhesion enhancement before Orviseal 150 and Orviseal FLM applications, preventing dusting on the surface and increasing adhesion strength.
Orviseal Premium 1K
It is a polyurethane-based, single component waterproof primer used for surface preparation and adhesion enhancement before Orviseal 150 and Orviseal FLM applications, preventing dusting on the surface and increasing adhesion strength.
Orviseal Premium 1K
It is a polyurethane-based, single component waterproof primer used for surface preparation and adhesion enhancement before Orviseal 150 and Orviseal FLM applications, preventing dusting on the surface and increasing adhesion strength.
Orviseal Premium 1K
It is a polyurethane-based, single component waterproof primer used for surface preparation and adhesion enhancement before Orviseal 150 and Orviseal FLM applications, preventing dusting on the surface and increasing adhesion strength.